Storing/Editing One-Touch Buttons 10-4110 Storing/Editing Address Book Settings2 Select a one-touch button to store or change ➞ press [Register/Edit].If you know the one-touch button's three digit number, press [ ] (One-Touch Button Number) ➞enter the three digit number of the desired one-touch button using - (numeric keys).If you select a one-touch button already storing a destination, proceed to step 4.NOTE• One-touch buttons that already have destinations stored in them are displayed with a colouredtriangle ( ) in the lower right corner of the key.• If you select a one-touch button that already has destinations stored in it, the destinations aredisplayed.• If you register multiple destinations as a group address in a one-touch button, the number ofdestinations registered in the group address is displayed.3 Select [Fax], [E-mail], [I-Fax], [File], [Group], or [Network Add. Book].● If you select [Fax] (The optional Super G3 FAX Board is installed):❑ Enter a name for the recipient of the fax in accordance with steps 4 and 5 of "Fax Numbers,"on p. 10-6.❑ Press [One-touch Button Name].❑ Enter a name for the one-touch button ➞ press [OK].❑ Enter the fax number of the destination in accordance with step 7 of "Fax Numbers," onp. 10-6.
