User Command Specifications 9. Details of command GET 6AXR-6AXY1 GET 6AXR-6AXYGET 6AXR-6AXYR setting inquiry G setting inquiry B setting inquiry C setting inquiry M setting inquiry Y setting inquiryGET□6AXR GET□6AXG GET□6AXB GET□6AXC GET□6AXM GET□6AXY?△6AXR ?△6AXG ?△6AXB ?△6AXC ?△6AXM ?△6AXYg:6AXR(G,B,C,M,Y)=▽For all other responses, refer to "Error List."-1A "busy" response is given while the zoom or focus lens is being driven.（Refer to the ZCONTDRV command and FCONTDRV command.）-2 The 6-axis correction R to Y can be set by the 6AXR to Y command.> GET 6AXR or ? 6AXR< g:6AXR=12, -8* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM× ○ ×× ○ ×* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.* "i:BUSY" may be returned if the power status is being switched.X600SX60○ ○ ○ ×○ ○ ○ ○SX6 ○ ○ ○– ○ ○ ×○ ○ ○ –SX50 ○ ○ ○RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneModel Power Input ModeRemote Local○ ○ ○ ○01.00** 01.01** 01.01** 01.01**SX50 SX6 SX60 X600NumberMode Control Setting ReferenceThis inquiry can be made when the projector is in both the remote mode and power-on status atthe same time.CommandssupportedExampleCommandsFunctionFormatDescriptionResponse6-axis correction R to Y hue/color saturation setting inquiryThis inquires about the current 6-axis correction R to Y hue and color saturation settings.PAGE 99
