User Command Specifications 9 .Details of command RANGE IMAGEFLIP1 RANGE IMAGEFLIPRANGE IMAGEFLIPRANGE□IMAGEFLIPr:IMAGEFLIP=I, , , …, -1A "busy" response is given while the zoom or focus lens is being driven.-2> RANGE IMAGEFLIP< r:IMAGEFLIP=I, NONE, CEILING, REAR, REAR_SEILING* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM× ○ ×× ○ ×* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.* "i:BUSY" may be returned if the power status is being switched.○X600SX60×○ ○ ○ ○ ○ ○SX6 ○ ○ ○○ ○ ×○ ○ ○ – –SX50 ○ ○ ○RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneModel Power Input ModeRemote Local○ ○ ○ ○01.00** 01.01** 01.01** 01.01**Control SettingSX50 SX6 SX60 X600ModeFunctionFormatFlip display setting option requestThis inquires about the parameter options which enable the flip display to be set.IDThe flip display can be set using the IMAGEFLIP command.CommandssupportedReferenceFor all other responses, refer to "Error List."This inquiry can be made when the projector is in both the remote mode and power-on statusat the same time.(Refer to the ZCONTDRV command and FCONTDRV command.)ExampleDescriptionResponseCommandsPAGE 160
