User Command Specifications 9．Details of command RANGE POWER1 RANGE POWERRANGE POWERRANGE□POWERr:POWER=I, , , ..., -1 This inquiry can be executed in any status provided that AC power is supplied to the projector.A "busy" response is given while the zoom or focus lens is being driven.With the SX50, the inquiry can be made in the remote mode only.-2 The power can be controlled by the POWER command.> RANGE POWER< r:POWER=I, ON, OFF* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM○ ○ ○○ ○ ○* If a command cannot be supported, 'INVALID_MODE' is returned as an error response.X600SX60○ ○ ××SX6 ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○SX50 ○ ○ ○RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-VideoModel Power Input ModeRemote LocalSCART None01.01**CommandsFunctionFormatExampleDescriptionResponseCommandssupportedThis inquires about the power control setting options.Power control setting option requestFor all other responses, refer to "Error List."○ ○ ○ ○01.01**ReferenceMode Control Setting– – ○IDSX50 SX601.01**01.00**X600SX60(Refer to the ZCONTDRV command and FCONTDRV command.)PAGE 128
