User Command Specifications 9．Details of command RANGE TERMINAL1 RANGE TERMINALRANGE TERMINALRANGE□TERMINALr:TERMINAL=I, , , …, -1A "busy" response is given while the zoom or focus lens is being driven.-2> RANGE TERMINAL< r:TERMINAL=I, IN, OUT* Commands are indicated by ">", and responses are indicated by "<".When a command is not supported, "e:000A INVALID_PARAMETER" is returned.Supported Command StatesOFF ON PM× ○ ×× ○ ×* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'TERMINAL_OUT' is returned as an error response.* "i:BUSY" may be returned if the power status is being switched.CommandssupportedSetting ReferenceFor all other responses, refer to "Error List."This inquiry can be made when the projector is in both the remote mode and power-on statusat the same time.This inquires about the parameter options which enable the terminal to be set.ID(Refer to the ZCONTDRV command and FCONTDRV command.)The terminal can be set by the TERMINAL command.SX6– – – –– – – –– – – –SX6– – –SX60X600– ○ ○ ×○ ×OUT ○ ○ × × ○ ○ –○ – – ○None Remote LocalSX50 IN ○ ○ ○ ○ ○×ModeD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCARTModel Parameter Input×Power○SX50Terminal setting option requestMode ControlSX60 X600CommandsExampleDescriptionResponseFunctionFormat01.00** 01.01**×01.01** 01.01**PAGE 167
