User Command Specifications ９．Details of command RANGE 6AXADJ1 RANGE 6AXADJRANGE 6AXADJRANGE□6AXADJr:6AXADJ=I, , , …, For all other responses, refer to "Error List."(1)However, a "busy" response is given while the zoom or focus lens is being driven.（ Refer to the ZCONTDRV command and FCONTDRV command. ）(2) ON or OFF for the 6-axis adjustment can be set using the 6AXADJ command .> RANGE 6AXADJ< r:6AXADJ=I, ON, OFF*Commands are indicated by ">", and responses are indicated by "<".When a command is not supported, "e:000A INVALID_PARAMETER" is returned.Supported Command StatesOFF ON PM－ － －× ○ ×*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.This inquiry can be made when the projector is in both the remote mode and power-on status atthe same time.CommandssupportedX600SX60○ ○ ○ ×○ ○ ○ ○SX6 ○ ○ ○－ － － －－ － － －SX50 － － －ＩＤMode RemarksD-RGB A-RGB1 A-RGB2 Comp Video Remote LocalSettingModel Power supply InputNoneS-Video D-Video SCARTSX6This command is used to inquire about the parameter options which enable the 6-axis adjustment to be set.SX60 X600ControlMode6-axis adjustment option inquirySX50ReferenceCommandsFunctionFormatExampleDescriptionResponse０１．００** ０１．０１** ０１．０１** ０１．０１**× ○ ○ ○PAGE 153
