User Command Specifications 9.Details of command GET AVOL1 GET AVOLGET AVOLGET□AVOL?△AVOLg:AVOL=For all other responses, refer to "Error List."-1A "busy" response is given while the zoom or focus lens is being driven.(Refer to the ZCONTDRV command and FCONTDRV command.)-2 The audio volume can be set by the AVOL command.> GET AVOL or ? AVOL< g:AVOL=18* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM× ○ ×× ○ ×* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.* "i:BUSY" may be returned if the power status is being switched.CommandsFunctionFormatDescriptionResponseControl SettingAudio volume setting inquiryThis inquires about the current audio volume setting.NumberMode ReferenceSX50 SX6 SX60 X60001.00** 01.01** 01.01**○ ○ ○ ○Model Power Input ModeRemote Local RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneSX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×SX60X600This inquiry can be made when the projector is in both the remote mode and power-on status atthe same time.CommandssupportedExample01.01**PAGE 102