User Command Specifications 9．Details of command RANGE WBRGB1 RANGE WBRGBRANGE WBRGBRANGE□WBRGB-1A "busy" response is given while the zoom or focus lens is being driven.-2> RANGE WBRGB< r:WBRGB=N, -20, 20, -20, 20, -20, 20* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM× ○ ×× ○ ×* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.* "i:BUSY" may be returned if the power status is being switched.CommandssupportedReferencer:WBRGB=N, , , ,, , For all other responses, refer to "Error List."This inquiry can be made when the projector is in both the remote mode and power-on statusat the same time.Screen color correction (adjustment) range requestMode Control SettingSX50 SX6This inquires about the range within which the screen color correction (adjustment) can be set.NumberSX60 X600(Refer to the ZCONTDRV command and FCONTDRV command.)The screen color correction (adjustment) can be set by the WBRGB command.CommandsFunctionFormatExampleDescriptionResponse01.00** 01.01** 01.01** 01.01**○ ○ ○ ○Model Power Input ModeRemote Local RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneSX50 ○ ○ ○ ○ ×○ ○ ○ – – ○SX6 ○ ○ ○ ○ ×○ ○ ○ ○ ○ ○SX60X600PAGE 146
