User Command Specifications 9．Details of command GET DGAMMA1 GET DGAMMAGET DGAMMAGET□DGAMMA?△DGAMMAg:DGAMMA=For all other responses, refer to "Error List."-1A "busy" response is given while the zoom or focus lens is being driven.（Refer to the ZCONTDRV command and FCONTDRV command.）-2 The dynamic gamma setting value can be selected by the DGAMMA command.> GET DGAMMA or ? DGAMMA< g:DGAMMA=1* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM× ○ ×× ○ ×* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.* "i:BUSY" may be returned if the power status is being switched.○ ○ ○ –SettingIDMeaningSX60 X6000 Off1 OnSX50Dynamic gamma value setting inquiryMode Control Setting ReferenceSX6CommandsFunctionFormatDescriptionResponseThis inquires about the current dynamic gamma value setting.This inquiry can be made when the projector is in both the remote mode and power-on status atthe same time.Commandssupported 01.00** 01.01** 01.01** 01.01**○ ○ ○ ○Model Power Input ModeRemote Local RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneSX50 ○ ○ ○ – ○ ○ ×SX6 ○ ○ ○ ×○ ○ ○ ○ ○○ ○SX60ExampleX600PAGE 88
