User Command Specifications 9．Details of command RANGE TRACK1 RANGE TRACKRANGE TRACKRANGE□TRACKr:TRACK=N, , -1A "busy" response is given while the zoom or focus lens is being driven.With some input signals, it may not be possible to make this inquiry.-2> RANGE TRACK< r:TRACK=N, 0, 31* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM× ○ ×× ○ ×* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.* "i:BUSY" may be returned if the power status is being switched.For all other responses, refer to "Error List."This inquiry can be made when the projector is in both the remote mode and power-on statusat the same time.(Refer to the ZCONTDRV command and FCONTDRV command.)CommandssupportedX600SX60× × ○ ×× × × ×SX6 × ○ ○– × ○ ×SX50 × ○ ○RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneModel Power Input ModeRemote Local○ ○ ○ ○01.01**Tracking adjustment range requestMode Control Setting ReferenceCommandsFunctionFormatExampleDescriptionResponseNumber× × × –This inquires about the values to which the tracking can be adjusted.01.00** 01.01** 01.01**The tracking adjustment can be set by the TRACK command.SX60 X600SX50 SX6PAGE 133
