User Command Specifications 9. Details of command1 9. Details of command9. Details of commandDescriptions of each command are provided starting from the next page.The command descriptions have the format shown below.* Alphabetic command name* This indicates the command format.* This explains the required parameters for the command.* This describes the command response.* This includes the command function, conditions, and notes.* This provides command usage examples.*Supported Command States *OFF ON PM× ○ ד○” when the power supply state is enabled while power management is in standby. Input signal is required when “×”.“○” when power supply state is ON.“○” when power supply state is OFF.CommandssupportedThe command is enabledin control modes markedby “○”.※Command type× × × ○ ○ ○Parameter typesFormatExampleD-VideoResponseDescriptionA-RGB2 Comp Video S-VideoModel PowerFunction * This briefly describes the command function.ParameterMode01.**** 11.**** 11.**** 11.****Commands Mode Control Setting ReferenceD-RGB A-RGB1Input RemarksSCART LocalNone RemoteSX50The command is enabled in states marked by “○”.○ ××× ○ ×SX6 SX60 X600This defines the environments that support the command (power supply state, input signalstate, control mode).Indicated here are the commands supported by each model (and user command version). "O": supported; "x":not supported.○ ○ ○ ○PAGE 13
