User Command Specifications ９．Details of command GET NOSHOWSTATUS1 GET NOSHOWSTATEGET NOSHOWSTATEGET□NOSHOWSTATE?△NOSHOWSTATEg:NOSHOWSTATE=For all other responses, refer to "Error List."(1)However, a "busy" response is given while the zoom or focus lens is being driven.（ Refer to the ZCONTDRV command and FCONTDRV command. ）(2) No show status ON/OFF is controlled using the "RC NOSHOW" command in the local mode. (Toggling)> GET NOSHOWSTATE or ? NOSHOWSTATE< g:NOSHOWSTATE=ON*Commands are indicated by ">", and responses are indicated by "<".When a command is not supported, "e:000A INVALID_PARAMETER" is returned.Supported Command StatesOFF ON PM－ － －× ○ ×* If the command cannot be supported, "NOT_POWER_SUPPLIED" is returned as an error response.*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.X600SX60○ ○○ ○ ○ ○ ○ ○SX6 ○ ○ ○－ －－ － － － － －SX50 － － －RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneModel Power supply Input ModeRemote Local× ○ ○ ○０１．００** ０１．０１** ０１．０１** ０１．０１**SX50 SX6 SX60 X600ModeOFF Screen not temporarily offON Screen temporarily offCommandsFunctionFormatNoShow status inquiryReferenceSettingControlThis inquiry can be made at any time provided that the power-on status is established.This command is used to inquire about the current NoShow status.Status MeaningＩＤCommandssupportedExampleDescriptionResponsePAGE 118
