User Command Specifications 9．Details of command RANGE DGAMMA1 RANGE DGAMMARANGE DGAMMARANGE□DGAMMAr:DGAMMA=I, , , …, -1A "busy" response is given while the zoom or focus lens is being driven.-2> RANGE DGAMMA< r:DGAMMA=I, 0, 1* Commands are indicated by ">", and responses are indicated by "<".Supported Command StatesOFF ON PM× ○ ×× ○ ×* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.* "i:BUSY" may be returned if the power status is being switched.CommandssupportedFor all other responses, refer to "Error List."This inquiry can be made when the projector is in both the remote mode and power-on statusat the same time.(Refer to the ZCONTDRV command and FCONTDRV command.)The dynamic gamma setting value can be selected by the DGAMMA command.X600SX60×○ ○ ○ ○ ○○ ○SX6 ○ ○ ○– ○ ○ ×SX50 ○ ○ ○RemarksD-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART NoneModel Power Input ModeRemote Local○ ○ ○ ○01.01**Dynamic gamma setting option requestMode Control Setting ReferenceCommandsFunctionFormatExampleDescriptionResponseID○ ○ ○ –This inquires about the parameter options which enable the dynamic gamma to be set.01.00** 01.01** 01.01**SX60 X600SX50 SX6PAGE 143
