Chapter 22-67F-2-2312.8.5 Installing to the Paper Deck (Cassette Heater Unit-23/25) 0014-0410iR7105 / iR7095 / iR7086 / iR7095P[1] Heater unit 1pc. [2] AC input connector 1pc.[3] Relay harness unit 1pc. [4] AC cable 1pcs.[5] Screw (w/ washer) 2pcs. [6] Cable protection bush 1pc.[7] Power supply label 1pc. [8] RS tight screw (M4X8) 2pcs.Turning Off the Main PowerWhen turning off the main power, be sure to go through the following instrict sequence to protect the machine's hard disk:1) Hold down on the power switch on the control panel for 3 sec or more.2) Operate on the touch panel according to the shut-down sequenceindicated so that the main power switch may be turned off.3) Turn off the main power switch.4) Disconnect the power cable (for the power outlet).Be sure to observe the following when installing the heater to the paperdeck:- Check to make sure that the host machine's and the paper deck have beeninstalled properly.- Take care to identify the types of screws (length, diameter) and location.[4][3][8][2][5] [7][6][5][1]
