Chapter 1414-23- If double feeding occurs, move the hook of the spring in the direction ofarrow A.- If pickup failure occurs, move the hook of the spring in the direction of B.F-14-5814.8.9 Location of the solenoids 0011-8945iR7105 / iR7095 / iR7086F-14-5914.8.10 Position of the Fixing Web Solenoid (SL2) 0010-9348iR7105 / iR7095 / iR7086a. If the Fixing Web Is NewUse the position of the solenoid [1] using the screw [2] so that the travelof the drive lever is 8.2 mm.F-14-60b. If the Fixing Web Is Not NewBefore removing the solenoid, check the position [A] of the drive leverwhen the solenoid [1] is ON. After replacing the solenoid, makeadjustments using the screw [2] so that the position of the drive lever isthe same (when the solenoid is ON).F-14-6114.8.11 Position of the Delivery Flapper Solenoid (SL3)0010-9350iR7105 / iR7095 / iR7086Use the screw [2] to adjust the position of the solenoid [1] so that the drivelever is fully pushed when the solenoid is ON (i.e., when the steel core isdrawn).F-14-6214.8.12 Position the Fixing/Feeder Unit Locking Solenoid(SL4) 0010-9351iR7105 / iR7095 / iR7086Use the screw [3] to adjust the position of the solenoid [1] so that the lockinglever [2] is 10.5 -/+ 0.5 mm away from the frame when the solenoid is ON(i.e., when the steel core is drawn).F-14-63SL2 : Fixing web solenoidSL3 : Delivery flapper solenoidSL4 : Fixing/feeder unit locking solenoidSL6 : Manual feed pickup latch solenoidSL7 : Deck (right) pickup solenoidSL8 : Deck (left) pickup solenoidSL9 : Cassette 3 pickup solenoidSL10: Cassette 4 pickup solenoidSL11: Reversing flapper solenoidBASL9SL10SL7SL8SL6SL11SL3SL4SL28.2mm[1][2]A[1][2][1][2]Fully pushed.10.5±0.5mm[1][2][3]
