Chapter 1010-25F-10-9510.5.28 HV-DC PCB10.5.28.1 Removing the HV-DC PCB 0010-9600iR7105 / iR7095 / iR70861) Remove the rear cover.2) Remove the high-voltage contact [1].- 3 connectors [2]- 2 screws [3]F-10-963) Remove the HV-DC PCB [1].- 5 connectors [2]- Free the cable from the wire saddle [3].- 2 screws [4]- 1 screw [5]F-10-9710.5.28.2 After Replacing the HV-DC PCB 0010-9598iR7105 / iR7095 / iR70861) Set the values (5 types) indicated on the label attached to the new HV-DCPCB for the respective service mode items:F-10-98[1] COPIER > ADJUST > HV-TR > H-PRE-TR[2] COPIER > ADJUST > HV-TR > HVT-TR[3] COPIER > ADJUST > HV-SP > HVT-SP[4] COPIER > ADJUST > DEVELOP > HVT-DE[5] COPIER > ADJUST > DEVELOP > OFFSETAC2) Turn off and then on the power.10.5.29 High-Voltage PCB10.5.29.1 Removing the High-Voltage Assembly 0011-7623iR7105 / iR7095 / iR70861) Remove the rear cover.2) Disconnect the 4 connectors [1], and remove the 3 screws [2]; then, freethe cable from the wire saddle [3].F-10-993) Slide out the high-voltage assembly [1] along the rails on both sides to de-tach.F-10-100[1][2][3] [3][1][2][3][1][2][2][3][4][5]H+04+05+05+01+24[1] [2] [3] [4] [5][1][1][1][2][2][2][3]
