Chapter 1717-9017.6.2 FEEDER17.6.2.1 FEEDER Items 0011-6102iR7105 / iR7095 / iR7086T-17-64934 transmission scan total 8 (black-and-white)935 universal transmission scan total (color)936 universal transmission scan total (black-and-white)937 box scan (color)938 box scan (black-and-white)939 remote san (color)940 remote scan (black-and-white) yes941 transmission scan /fax (color)942 transmission scan/fax (black-and-white)943 transmission scan/i-fax (color)944 transmission scan/i-fax (black-and-white)945 transmission scan/e-mail (color)946 transmission scan/e-mail (black-and-white)947 transmission scan/FTP (color)948 transmission scan/FTP (black-and-white)949 transmission scan/SMB (color)950 transmission scan/SMB (black-and-white)951 transmission scan/IPX (color)952 transmission scan/IPX (black-and-white)953 transmission scan/database (color)954 transmission scan/database (black-and-white)955 transmission scan/local print (color)956 transmission scan/local print (black-and-white)957 transmission scan/box (color)958 transmission scan/box (black-and-white)FEEDER > OPTION*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).**: model equipped with DADF-M1 (outside Japan: iR7086).Sub item Description LevelDOC-F-SW * Use it to enable/disable stream reading mode.1settings0: stream reading (default); 1: stream reading for small size only; 2: fixed readingSIZE-SW Use it to enable/disable the mixed original detection mechanism (AB and inch).1settings0: on (disable detection; default); 1: off (enable detection)SLW-SPRT * Use it to decrease the separation speed for original pickup.1settings0: normal mode (default); 1: deceleration modeLS-DBL ** Use it to enable/disable ADF high-speed duplexing mode.1settings0: on (high-speed duplexing mode; default); 1: off (low-speed duplexing mode)STAMP-SW**Use it to indicate the installation of a stamp.1settings0: stamp not installed; 1: stamp installed (default)HS-DBL * Use it to enable/disable ADF high-speed reversal mode.1settings0: off (normal mode; default); 1: on (high-speed duplexing mode)If an increase in productivity is desired in ADF duplexing mode, set it to '1'.No. Counter description Support
