Chapter 1010-12F-10-1310.5.1.5 Upper Vertical Path Cover10.5.1.5.1 Removing the Upper Vertical Path Cover0017-9840iR7105 / iR7095 / iR7086 / iR7095P1) Open the Manual feed tray unit.2) Open the upper vertical path cover [2].3) Holding the Manual feed tray unit [1] slightly up, pull out the uppervertical path cover [2] upward.F-10-1410.5.1.6 Upper Front Cover Unit10.5.1.6.1 Removing the Upper Front Cover Unit0017-9841iR7105 / iR7095 / iR7086 / iR7095P1) Remove the inside upper cover.2) Remove the flat-headed screw [1] (1 pc. each), and detach the 2 magnetcatches [2].3) Remove the face plate [3], and remove the 3 screws [4]; then, detachthe upper front cover unit [5].F-10-15If the card reader is mounted, be sure to disconnect the connector [1].F-10-1610.5.1.7 Upper Rear Cover10.5.1.7.1 Removing the Upper Rear Cover0017-9842iR7105 / iR7095 / iR7086 / iR7095P1) Remove the ADF.2) Remove the 3 screws [1], and detach the right pocket plate [2].3) Remove the 3 screws [3], and detach the left pocket plate [4].F-10-17Mark the position of the screw [3] so that the left pocket plate [4] may bemounted back to itsoriginal position.4) Remove the upper rear cover [5].10.5.1.8 Main Controller Box Cover10.5.1.8.1 Removing the Main Controller Box Cover0017-9843iR7105 / iR7095 / iR7086 / iR7095P1) Remove the 4 screws [1], and detach the main controller box cover [2].F-10-1810.5.1.9 System Connector Cover10.5.1.9.1 Removing the System Connector Cover0017-9844iR7105 / iR7095 / iR7086 / iR7095P1) Remove the 2 screws [1], and detach the system connector cover [2].[4] [3][1][6][5] [5][2][1][2][1] [2][4][3] [2][5] [4][4] [4][1][5][4] [1][1][2][3][3][1][1][2]
