Chapter 1111-45Setting range, item0: display warning screen 1: hide warning screenSetting Procedure1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Thenby pressing [USER MODE] button again, [SERVICE MODE] screen is displayed).2) Startup level 2 of [SERVICE MODE] (After starting up [SERVICE MODE] in step 1, press [USER MODE] button again. Then, by pressing [2] button oncontrol panel, the screen is displayed.3) Press [COPIER] button.4) Press [Option] button.5) Press [BODY] button.6) Press [<-]or[->] button.7) Press [ANIM-SW] button.8) Press either 0 (display warning screen) or 1 (hide warning screen) on control panel (the numerical value input in the field is displayed), and press [OK] button.9) Check to see that it is reflected in setting field, and turn off the main power, and then, turn on the main power.-Setting of Screen Transition from MEAP Screen to the Standard ScreenIn the case that the operation is restricted by MEAP application, make a setting to hide Native applications such as Copy/Send/Box. With this setting, disable screentransition with => key.Default value0: OFF (transit to Native screen)Setting range, item0: OFF (transit to Native screen) 1: ON (No-transition to Native screen)Setting Procedure1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Then,by pressing [USER MODE] button again, [SERVICE MODE] screen is displayed).2) Startup level 2 of [SERVICE MODE] (After starting up [SERVICE MODE] in step 1, press [USER MODE] button again. Then, by pressing [2] button oncontrol panel, the screen is displayed.3) Press [COPIER] button.4) Press [Option] button.5) Press [BODY] button.6) Press [<-] (arrow) button.7) Press [ANIM-DSP] button.8) Press either 0 (transit to Native screen) or 1 (no-transition to Native screen) on control panel (the numerical value input in the field is displayed), and press[OK] button.9) Check to see that it is reflected in setting field, and turn off the main power, and then, turn on the main power.
