Chapter 1212-5Log detailed screenF-12-3Detailed information of individual communication test error is displayed.Refer to the displayed message to "Error message list".It shifts to "Log list screen" by the [OK] button pressing.Maximum length of error information: 128 characters (not include NULL)12.1.9 Sleep operation 0011-6839iR7105 / iR7095 / iR7086 / iR7095PWhen there is a method that should be transmitted while e-RDS is operating (ON), e-RDS wakes from the state of sleep and begins transmitting.12.1.10 Network Setting (Maintenance) 0011-6840iR7105 / iR7095 / iR7086 / iR7095PYou should do the network setting of Device appropriately before the e-RDS setting.A. Display the Additional Functions screen.- Press [Additional Functions (*)] key.- Input ID code.B. Display the TCP/IP Settings screen.- Select (touch) [System Settings] > [Network Settings] > [TCP/IP Settings] on the Touch Panel Display.C. Setting of items related to IP address- Select (touch) [IP Address Settings] => IP Address Settings screen is displayed.- Set each items such as IP Address, Subnet Mask, Gateway Addresses, and DHCP, etc.- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.D. DNS Settings- Select (touch) [DNS Settings] => DNS Settings screen is displayed.- Set necessary items.- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.E. Proxy Settings- Select (touch) [Proxy Settings] (Press Down arrow button until [Proxy Settings] is displayed on the TCP/IP Settings screen.) => Proxy Settings screen isdisplayed.- Set necessary items.- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.F. Display the normal screen.- Press [Additional Functions (*)] key pressing or press [Done] button to a necessary frequency.12.1.11 e-RDS Setting (Maintenance) 0011-6841iR7105 / iR7095 / iR7086 / iR7095PA. Display the Menu screen of e-RDS from the service mode.A-1. Shift to the service mode
