Chapter 1010-29F-10-1183) Remove the 2 screws [1], and disconnect the 2 connectors [2]; then, detachthe delivery speed switchover clutch [3].F-10-119When detaching the delivery speed switching clutch, take care not to lose thebearing and washer (rear only) on both sides of the clutch shaft.4) Disconnect the 2 connectors [1], and remove the 2 screws [2]; then, detachthe curl-removing fan [3].F-10-12010.5.37 Drum Fan10.5.37.1 Removing the Drum Fan (FM8) 0010-9585iR7105 / iR7095 / iR70861) Remove the HV-DC PCB.2) Remove the 2 screws [1], and disconnect that connector [2]; then, de-tach the drum fan unit [3].F-10-1213) Disconnect the connector [1], and remove the 3 screws [2]; then, detachthe drum fan [3].F-10-12210.5.38 Pre-Transfer Charging Assembly Fan10.5.38.1 Removing the Pre-Transfer Charging AssemblyFan (FM10) 0010-9583iR7105 / iR7095 / iR70861) Remove the process unit cover. (4 screws)2) Remove the 2 screws [1], and disconnect the 2 connectors [2]; then, de-tach the fan motor [3].F-10-1233) Disconnect the connector [1], and remove the 2 screws [2]; then, detachthe pre-transfer charging assembly fan [3].[1][3][4][3][2][3][1][2][1][1][2][2] [3][3] [1][1][2][1] [3] [2][2][1] [3][2]
