g. Go to step 5.5. Replace the cover (see “Replacing the server top cover” on page 227).6. Slide the server in the rack.7. Reconnect the power cord and any cables that you removed.8. Turn on the peripheral devices and the server.Removing the system batteryThis information provides instructions on how to remove the system board.About this taskThe following notes describe information that you must consider when replacingthe battery:v IBM has designed this product with your safety in mind. The lithium batterymust be handled correctly to avoid possible danger. If you replace the battery,you must adhere to the following instructions.Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.v If you replace the original lithium battery with a heavy-metal battery or abattery with heavy-metal components, be aware of the following environmentalconsideration. Batteries and accumulators that contain heavy metals must not bedisposed of with normal domestic waste. They will be taken back free of chargeby the manufacturer, distributor, or representative, to be recycled or disposed ofin a proper manner.v To order replacement batteries, call 1-800-IBM-SERV within the United States,and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. andCanada, call your support center or business partner.Note: After you replace the battery, you must reconfigure the server and resetthe system date and time.Statement 2CAUTION:When replacing the lithium battery, use only IBM Part Number 33F8354 or anequivalent type battery recommended by the manufacturer. If your system hasa module containing a lithium battery, replace it only with the same moduletype made by the same manufacturer. The battery contains lithium and canexplode if not properly used, handled, or disposed of.Do not:– Throw or immerse into water– Heat to more than 100°C (212°F)– Repair or disassembleDispose of the battery as required by local ordinances or regulations.To remove the system-board battery, complete the following steps:Chapter 6. Removing and replacing components 279