b. Use your thumb and index finger to lift the battery from the socket.6. Dispose of the battery as required by local ordinances or regulations. See theIBM Environmental Notices and User's Guide on the IBM Documentation CD formore information.Replacing the system batteryThis information provides instructions on how to replace the system board.About this taskThe following notes describe information that you must consider when replacingthe system-board battery in the server.v When replacing the system-board battery, you must replace it with a lithiumbattery of the same type from the same manufacturer.v To order replacement batteries, call 1-800-426-7378 within the United States, and1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada,call your IBM marketing representative or authorized reseller.v After you replace the system-board battery, you must reconfigure the server andreset the system date and time.v To avoid possible danger, read and follow the following safety statement.Statement 2CAUTION:When replacing the lithium battery, use only IBM Part Number 33F8354 or anequivalent type battery recommended by the manufacturer. If your system has amodule containing a lithium battery, replace it only with the same module typemade by the same manufacturer. The battery contains lithium and can explode ifnot properly used, handled, or disposed of.Do not:v Throw or immerse into waterv Heat to more than 100°C (212°F)v Repair or disassembleDispose of the battery as required by local ordinances or regulations.To install the replacement system-board battery, complete the following steps:Chapter 6. Removing and replacing components 281
