Table 17. Supported adapters, slot in which to install the adapters, and information about the adapters. (continued)Name of adapterSuggested slotinstallation sequence NotesIBM Dual-port 10 Gb-T(copper) Ethernet AdapterInstalls in theoptional 10 GbEthernet adapterconnector on thesystem board.Install this adapter in the 10 Gb Ethernet adapter connector onthe system board. For the location of the connector, see“System-board internal connectors” on page 28.IBM Dual-port 10 Gb SFP+(fibre) Ethernet AdapterInstalls in theoptional 10 GbEthernet adapterconnector on thesystem board.Install this adapter in the 10 Gb Ethernet adapter connector onthe system board. For the location of the connector, see“System-board internal connectors” on page 28.Supported RAID cache cardsThis information describes the RAID cache cards that are supported in the server.About this taskThe following table lists the supported RAID cache cards:Table 18. Supported RAID cache cards and where you can install the cache cards.RAID cache cardWhere to install thecard NotesServeRAID M5100 Series 512MB Cache/RAID 5 Upgradefor IBM System x (RAID cachecard)You can install thiscache card in theoptional SAS adapterconnector on thesystem boardorthe followingServeRAIDcontrollers:v ServeRAID M5110SAS/SATAController for IBMSystem xv ServeRAID M5120SAS/SATAController for IBMSystem xv To keep the SDRAM on this cache card in a self-refreshstate, you can purchase and attach the optionalServeRAID M5100 Series Battery Kit for System x.v Provides RAID levels 5 and 50 upgrade support.v Enables the ServeRAID controller to run MegaRAIDfirmware.v Has 40-bit memory.74 System x3750 M4 Types 8722 and 8733: Installation and Service Guide
