102 IBM xSeries 130: User’s Reference264 Magnetic tapedriveAborted Test setup error: No tape drive found Check the cable andpower connections tothe drive.Refer to the informationthat is provided with thetape drive.If the problem persists,call for service.Failed The load/mount test failed for device n on adapter m(where n is the number of the device and m is theadapter number)Refer to the informationprovided with the tapedrive.If the problem persists,call for service.The self-diagnostic failed for device n on adapter m(where n is the number of the device and m is theadapter number)The unload/eject test failed for device n on adapterm(where n is the number of the device and m is theadapter number)The unload/eject push button test failed for device non adapter m(where n is the number of the device and m is theadapter number)The read/write self-diagnostic failed for device n onadapter m(where n is the number of the device and m is theadapter number)Insert a new tapecartridge; then, run thediagnostic test again.Refer to the informationthat is provided with thetape drive.If the problem persists,call for service.301 Keyboard Failed On system board keyboard test failed 1. Verify that thekeyboard cable isconnected.2. If the problemremains, replacethe keyboard cable.If the problem persists,call for service.302 Mouse Failed On system board pointing device test failed. Replace the pointingdevice. If the problempersists, call for service.305 Video monitor Any message Refer to the informationthat comes with themonitor.Table 15. Diagnostic error messages.Code Function Result Text message Action
