Chapter 1. Introduction 7Rear viewFigure 3. Identifying appliance server controls and indicators on the xSeries 130 model 8654Ethernet 1 speed indicator: This green LED lights when the speed of the EthernetLAN that is connected to Ethernet port 1 is 100 Mbps.Ethernet 1 link indicator: This green LED lights when there is an active linkconnection on the 10BASE-T or 100BASE-TX interface for Ethernet port 1.Select light: This green LED lights when the monitor, keyboard, and mouse arelogically connected to this appliance server. This light duplicates the LED in the selectbutton/indicator on the front of the appliance server.System-error light: This amber LED lights when a system error occurs. An LED onthe Light Path Diagnostics panel on the system board will also be on to further isolatethe error. This light duplicates the system-error light on the front of the server.Power-on light: This green LED lights and stays on when you turn on your applianceserver. This light duplicates the power-on light on the front of the appliance server.Ethernet 2 link indicator: This green LED lights when there is an active linkconnection on the 10BASE-T or 100BASE-TX interface for Ethernet port 2.Ethernet 2 speed indicator: This green LED lights when the speed of the EthernetLAN that is connected to Ethernet port 2 is 100 Mbps.Ethernet 1 speedindicator (green)Ethernet 2 speedindicator (green)Ethernet 1 linkindicator (green)Ethernet 2 linkindicator (green)Power-onlight (green)Select light (green)System-errorlight (amber)
