- 18 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setRisks if Not Used for Its Intended Purpose5.2Danger due to misuse!Incorrect use of the FLS 106 scanner can lead to dangeroussituations!Incorrect use of the FLS 106 scanner may put the user at risk, damage the scanner and/or thetechnical equipment connected to the scanner.Examples of improper use that may put persons/equipment at risk:- Safety devices are bypassed or rendered ineffective.- The FLS 106 scanner is used in a defective state.- The FLS 106 scanner is used outside the specified range of technical parameters.- The field of application is changed by modifications to the design.Claims due to the scanner's abnormal use are excluded!Safety Instructions5.3General Information5.3.1Risks cannot be totally excluded even if the FLS 106 scanner is used for its intended purpose.Observe the safety information and hazard warnings listed below to prevent damage to propertyand personal injury. Also observe the operating and safety instructions for all other devices used inthe measurement set-up.Carry out a visual check before performing a measurement with a product fromLanger EMV-Technik GmbH. Replace any damaged connecting cables, attachments and probes.Please contact Langer EMV-Technik GmbH if damaged parts need to be replaced or repaired.Wear tight-fitting clothes when using the scanner. Langer EMV-Technik GmbH assumes no liability for damage to property and/or personal injuryor for consequential damage that arises from the incorrect unpacking, set-up or operation ofthe FLS 106 scanner.Warning!
