- 39 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setRemoving the Protective Film12.5After setting up the scanner at its place of operation, remove the protective film.Danger due to use of sharp-edged, metallic tools!Sharp-edged, metallic tools can cause damage to persons by cuts!Damage to property due to sharp-edged, metallic tools!Remove the protective film only by hand.Do not use any tools such as knives, cutters or scissors to remove the protective film. Thereis a risk that sharp-edged, metallic tools cause damage to the system, such as scratches onthe scanner or damage to the insulation of cables or to persons by cuts.Adjusting the Height-Adjustable Machine Feet12.6The height-adjustable machine feet allow the user to adjust the scanner to slightly uneven worksurfaces.The adjustable height is 3.8 mm.Figure 35: Machine feet on the scannerThe feet can be set to the desired height with the height adjustment screw (hexagon socket 4 mm).The clamping screw (hexagon socket 2.5 mm) fixes the feet at the respective height.Warning!Sharp elements!Caution!
