- 65 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setFigure 81: Near-field microprobe installed withoutprotective capFigure 82: Protective cap of the ICR near-field probe withlock functionInstalling the BT 706 Bias-Tee17.4The BT 706 bias-tee (Figure 83) has to be connected upstream to ensure the ICR probe's powersupply. To do so, mount the output of the BT 706 bias tee on the RF in input of the scanner'sZ-axis tower.Important: Only fasten the bias tee by hand to prevent damage!Figure 83: BT 706 bias-tee Figure 84: Bias-tee mounted on the scanner ("RF in")Connect the SMA-SMA RA measuring cable that is connected to the SMA coupling to theSMA input of the BT 706 (Figure 85).
