- 45 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setInstalling the DM-CAM Digital Microscope Camera14.3.2Use the large, silver-colored knurled screw and the black, knurled plastic nut to mount the camerascrew on the DM-CAM holder.3. Insert the digital microscope camera into the opening of thecamera screw and fix it in the desired place with the small, silver-colored knurled screw. Themicroscope camera can be installed before or after mounting the DM-CAM holder.3.Figure 43: Mounted camera screw Camera screw shown in detailThen connect the DM-CAM cable to the HR10 connector marked Camera on the Z-axis tower(Figure 44).Figure 44: Digital DM-CAM microscope camera installed and connected to the Z-axis tower via a cable
