- 32 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setClamping Pieces10.4The clamping pieces are used as fasteners to individually position and mount the UH DUTuniversal holder or a DUT on the FLS 106 scanner's T-slot table.The clamping pieces can be mounted in a T-slot with the hexagon socket screw M6 (hexagonsocket 5 mm) and a T-nut. The clamping pieces' angle and height can be adjusted with the twogrub screws (hexagon socket 4 mm).Figure 29: Clamping piece with grub screws Hexagon socket screw for clamping pieceUH DUT with Claw 01 and Claw 0210.5The UH DUT universal holder is used to fix the DUT. The universal holder is 297 mm long,210 mm wide and 8 mm high.The (20 x 20) mm grid of M3 threaded holes allows the DUT's individual positioning and the use ofDUTs of different sizes.The DUT can be fixed with the respective claw 01 and/or claw 02. The choice of the appropriateclaws depends on the height of the DUT.Figure 30: UH DUT with claw 01 and claw 02 fastened on the T-slot plate
