- 50 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setSoftware Installation15Note on Software Installation15.1Put the device into service as described in chapter 13 before installing the software.Installing the scanner driver15.2As the driver is not installed automatically by Windows when the IC scanner is connected to yourcomputer, the driver installation needs to be done manually.Process:a) Connect the scanner to the computer via the USB type A/B cable (section 14.6).b) Switch on and boot the computer.c) Switch the scanner on (section 14.8).d) Plug in the USB memory stick containing CS-Scanner software.Then on the computer:1) Open the Windows Control Panel, search for and open the Device Manager.2) Double click the Trinamic Stepper Device entry under Other Devices.Figure 53: Device manager with the Trinamic Stepper Device entry and an attention sign
