- 71 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setInstalling a Near-Field Probe on the FLS 106 PCB18.2The SH 01 probe holder is fixed to the aluminum mounting bracket with the two M3countersunk-head screws.Figure 102: Mounting the probe holder on the aluminum mounting bracketConnect the SSMB plug of the SSMB-HR10 cable to the SSMB connector of the SH 01 probeholder (Figure 103) and connect the HR-10 plug to the connector marked rot. Axis on the Z-axistower (Figure 104).Figure 103: Connecting the SSMB plug to the SH 01 Figure 104: Connecting the HR10 plug to the connectoron the Z-axis towerNext insert the near-field probe into the probe sleeve of the probe holder from above and carefullytighten the screw on the outside of the probe sleeve by hand (Figure 105).
