- 60 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setInstalling the GND 25 Ground Plane16.3.2Place the GND 25 ground plane (Figure 69) on the GND 25 holder so that the anti-rotation elementis located in the desired notch on the lower side of the GND 25. The GND 25 can be quicklyrotated by 45° or 90° if necessary by using a different notch.Figure 69: GND 25 ground planeSafety Instructions for GND 25 Groundplane16.3.3Danger!Danger of injury due to falling GND 25 ground plane.Property damage due to falling GND 25 ground plane!The GND 25 rests loosely on the GND 25 holder. This means that the installed GND 25may fall off or down when the IC scanner is transported, for example.Always remove the GND 25 before transporting the FLS 106 IC scanner.Warning!!Caution!
