- 61 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setInstalling an ICR Near-Field Microprobe17Safety Instructions for Installing an ICR Near-Field Microprobe17.1The probe tip of the ICR probe is highly sensitive to mechanicalstress!Possible damage due to careless or incorrect handling!Only remove the protective cap of the ICR near-field microprobe (short: ICR probe) afterinstallation or shortly before measurement.Avoid touching the probe tip, even with the DUT!Handle the ICR probe with extreme care at all times.Laying the Connecting Cables17.2Unscrew the two screws of the cable holder on the rotary ring and place the upper part of the cableholder on one side (see Figure 70).Figure 70: Unscrewing the cable holder!Caution!
