- 19 / 83 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setHazard Due to Electrical Voltage5.3.2Danger from electricity!Risk of injury due to electric shock!Always check any attachments, measuring devices, cables and probes before using thescanner. Never use any damaged or defective devices.Do not connect or disconnect any cables whilst the FLS 106 scanner is in operation.Only staff from Langer EMV-Technik GmbH may open the scanner and work on theelectrical components and electrical lines.Switch the device off immediately, disconnect the mains plug and contactLanger EMV-Technik GmbH if you detect any damaged insulation on lines, cables orelectric components!Hazard Due to Movements along the Axes5.3.3Danger from movement along the axes!Risk of injury due to crushing!Keep limbs away from areas where they can be caught by moving parts.Important: The scanner may only be operated within a protective enclosure (section 6.1.1 and14.1.1) or with a spatial separation (section 6.1.2 and 14.1.2). As a result, attachments, probes andDUTs can only be installed and removed when the FLS 106 scanner is at a standstill.Airborne noise emission if used for its intended purpose5.4The noise level is below 70 dB(A) if the FLS 106 scanner is used for its intended purposeNo ear protection is required.Warning, ElectricityWarning,Crushing of hands
