User Guide194www.nec-computers.comProblems with the Express ServerError message when using the Boot-On-LAN feature with Microsoft® RemoteInstallation Service:The SAS ROMB (RAID On MotherBoard) feature requires 22 kB of conventionalmemory. This reduction in memory is known to cause a problem when using the Boot-On-LAN feature with the Microsoft Remote Installation Service (RIS). The followingmessage will be displayed:If Microsoft RIS is required to be used on this server, then it is necessary to run withSAS ROMB disabled (see “Enabling the RAID Feature” on page 91) or use additionalhardware to provide the RAID functionality (LSILogic MegaRAID SAS 8408E or LSIMegaRAID SAS ZCR 8300XLP).The server does not power on:■ Is the server properly supplied with power?- Check if the power cord is connected to a power outlet (or UPS) that meets thepower specifications for the server.- Make sure to use the power cord provided with the server. Check the powercord for broken shield or bent plugs.- Make sure the power breaker for the connected power outlet is on.- If the power cord is plugged to a UPS, make sure the UPS is powered and it out-puts power. See the manual that comes with the UPS for details.Power supply to the server may be linked with the connected UPS using theCMOS Setup utility of the server.■ Did you press the POWER switch?- Press the POWER switch on the front of the server to turn on the power (thePOWER/SLEEP lamp lights).The server does not power on:■ Is the power switch enabled?- Restart the server and start the BIOS SETUP utility.Windows NT has found only 509K of low memory.512K of low memory is required to run WindowsNT. You may need to upgrade your computer or runa configuration program provided by the manufac-turer.
