User Guide306www.nec-computers.com2. Insert the NEC ExpressBuilder CD-ROM into the DVD-ROM drive.3. Click [Setup] on the Master Control Menu.4. Click [Configuration Diskette Creator].5. Click [Create New Information files] from the [File] menu.6. Specify each item and click [OK].7. Follow the on-screen instructions to specify each item on the dialog box andclick [Next].Note: If you click on [Cancel], all the values already enteredwill be deleted.Once you have finished completing the specification of setup information, the[Save Setup Information] dialog box will appear.8. Make sure that the [Configuration Diskette] check box is checked, and type afile name for the Setup File in [File Name].9. Insert a 1.44MB floppy disk into the floppy disk drive and click [OK].The [Configuration Diskette] is created; we recommend you label it and store it in asafe place. Use it to install Windows Server 2003 or Windows 2000.If you want to modify an existing information file, click [Modify Information Files] onthe Configuration Diskette Creator Window. Refer to the Help file for moreinformation.Installing Optional Mass Storage DriverTo install an optional Mass Storage Driver supported by the Express Setup, follow theprocedure below to create a [Configuration Diskette].1. Display the Configuration Diskette Creator window.2. From the [File] menu, click [Create new information files].3. Specify each item and click on [OK].4. Follow the message to specify each item on the dialog box and click on [Next].Note: If you click on [Cancel], all the values already enteredwill be deleted.5. When [User and application setup] is displayed, check [Apply OEM-FD formass storage device].6. When the [Save Setup Information] dialog box is displayed, confirm that the[Configuration Diskette] check box is checked, and input file name for theSetup File in [File Name].7. Insert a 1.44MB floppy disk into the floppy disk drive and click [OK].
