User Guide259www.nec-computers.com9. Close the [Add or Remove Programs] dialog box.10. Close the [Control Panel] dialog box.To start Network Monitor, point to [Program] → [Administrative Tools] and click[Network Monitor].For information on how to operate Network Monitor, refer to Online Help.Installing Maintenance UtilitiesVarious maintenance utilities are contained in your NEC ExpressBuilder CD-ROM.See “Appendix 7: Installing and Using Utilities” on page 294.Updating the System - Installing Service packWarningIf you install from the Windows Server 2003 CD-ROM whichcontains Service Pack 1, you do not need to install the ServicePack 1 again.Update the system in the situation below:■ Modified system configuration.■ Recovered the system using recovery process.Log on to the system with the account that has administrative authority (e.g.Supervisor) and insert the NEC ExpressBuilder CD-ROM into the optical device drive.[Setup Software] in [Master Control Menu] screen is displayed, right-click the item.Click [Update the System] from the menu and the setup will start. Follow the on-screen instructions.Making Backup Copies of System InformationThe system information includes the current BIOS settings and any specificinformation for the server.Save the information after completing the system setup.Without the backup data, you will not be able to recover the information.You can save the information by the following process.1. Set the NEC ExpressBuilder CD-ROM in the optical device drive and rebootthe system.2. Select [Tools].3. Select [Off-line Maintenance Utility].4. Select [System Information Management].5. Insert a diskette in the floppy disk drive.6. Select [Save].
