User Guide65www.nec-computers.comCautionIf the optical disc drive produces an abnormal noise afterinserting the optical disc, remove the disc, and insert it again.To remove an optical disc, press the Open/Close button to eject the tray, as describedfor inserting it, and then take the disc out of the tray. (The orange-lit access lampindicates ongoing disk access. The Open/Close button does not work while the lamp islit.)Your OS may have a command to eject the tray.When you have taken out the disc, retract the tray back in place.When you fail to ejectWhen you fail to eject the DVD-ROM tray with the Open/Close button and take out theDVD-ROM from the server:1. Press the POWER switch to power off the server.The POWER/SLEEP lamp goes off.2. Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length(a straightened large paper clip will make a substitute) into the emergency holeon the right front of the optical disc drive and gently push it in until the tray isejected.Caution■ Do not use a toothpick or plastic stick that is easy to break.■ If the above procedure does not let you take out the DVD-ROM, contact your sales agent.3. Hold the tray and pull it out.4. Take out the optical disc.5. Push the tray back into position.
