User Guide287www.nec-computers.comDriver Installation and Device SettingsThis section describes how to install and setup various standard drivers mounted on thedevice.For information on installing and setting up a driver that is not described in this section,please refer to the document delivered with the driver.PROSetPROSet is a utility that checks the function of network contained in the network driver.Using PROSet enables the following items:■ Verify detailed information of the adapter.■ Diagnose loop back test, packet transmission test and so on.■ Setup of teaming.Configuring several network adapters as one team provides the server a tolerantenvironment on any trouble and enhance throughput between the switches.PROSet is necessary to use these features.To install PROSet:1. Insert the NEC ExpressBuilder CD-ROM into the optical device drive.2. The [Windows Explorer] dialog starts.c. In the case of the standard start menu, click Start menu and click[Windows Explorer].d. In the case of the classic start menu, click Start menu, point to[Programs], [Accessories] and click [Windows Explorer].3. Run "PROSet.exe" in the following directory::\WINNT\W2K3AMD\NS4\PROSet\WS03_32EThe [Intel(R) PROSet - InstallShield Wizard] dialog starts.4. Click [Next].5. Choose "I accept the terms in the license agreement" and click [Next].6. Choose "Complete" and click [Next].7. Click [Install].8. When [InstallShield Wizard Completed] window is displayed, click [Finish].9. Restart the system.Network DriverSpecify the details of network driver.The standard network driver that is mounted will be installed automatically, but the linkspeed and duplex mode need to be specified manually.IP addresses cannot be set when the "Internet Protocol (TCP/IP)" check box is OFF.Check ON the "Internet Protocol (TCP/IP)" check box to be able to set IP addresses.
