User Guide234www.nec-computers.comRelocating/Storing The ServerFollow the procedure below to relocate or store the server:WarningObserve the following instructions to use the server safely. Failure tofollow these instructions may cause a fire, personal injury, or propertydamage.■ Never attempt to lift the server only by yourself.■ Do not install the server in any place other than specified.■ Do not connect/disconnect any interface cable with the power cordof the server plugged to a power source.Caution■ If the server needs to be relocated/stored due to a change inthe floor layout to a great extent, contact the sales agent.■ Make sure to make a backup copy of your valuable data inthe hard disk, if any.■ Make sure not to apply a shock to hard disks to relocated theserver if the contains any.1. Take a floppy disk and an optical disc out of the server, if any.2. Power off the server (the POWER/SLEEP lamp goes off).3. Unplug the power cord of the server from a power outlet.4. Remove all the cables from the server.5. Hold the server by its bottom with at least three persons to carry the server.WarningDo not hold the front door to lift the server.The front door may be disengaged from the server, causingpersonal injury.6. Protect the server with the shock-absorbing materials, and pack it securely.
