User Guide79www.nec-computers.comPeripheral Configuration SubmenuCautionNote that the interrupt and/or base I/O address must not conflictwith others. If the value set for the interrupt or base I/O addressis used in another resource, a yellow asterisk (*) appears.Reassign proprely any item with a yellow asterisk.LAN1 Option ROMScanDisabledEnabledEnables or disables the BIOSscan of the onboard LANcontroller.LAN2 Option ROMScanDisabledEnabledEnables or disables the BIOSscan of the onboard LANcontroller.Table 12: Peripheral Configuration SubmenuFeature Choices orDisplay OnlyDescription Your SettingSerial Port A DisabledEnabledAutoEnables or disables the serialport ABase I/O address 3F82F83E82E8Set the base I/O address forserial port AInterrupt IRQ3IRQ4Set the interrupt for serial port ASerial port B DisabledEnabledAutoEnables or disables the serialport BBase I/O address 3F82F83E82E8Set the base I/O address forserial port BInterrupt IRQ3IRQ4Set the interrupt for serial port BUSB 2.0 Controller DisabledEnabledEnables or disables the USB2.0 controller.Parallel ATA DisabledEnabledEnables or disables the ParallelATA.Table 11: PCI Device, Onboard LAN Submenu (Continued)Feature Choices orDisplay OnlyDescription Your Setting
