User Guide265www.nec-computers.comInstalling Microsoft Windows Server 2003You will need the following for the installation of the Windows Server 2003:■ NEC ExpressBuilder CD-ROM■ Microsoft Windows Server 2003 Standard Edition (CD-ROM), MicrosoftWindows Server 2003 Enterprise Edition (CD-ROM), Microsoft Windows Server2003 R2 Standard Edition (CD-ROM), or Microsoft Windows Server 2003 R2Enterprise Edition (CD-ROM).■ Microsoft Windows Server 2003 Service Pack (CD-ROM).■ User's Guide■ Getting Started■ Windows Server 2003 OEM-DISK for NEC ExpressBuilderBefore installing, create Windows Server 2003 OEM-DISK for NEC ExpressBuilder.Creating "Windows 2003 OEM-DISK for NEC ExpressBuilder"You can create the Windows 2003 OEM-DISK for NEC ExpressBuilder with thefollowing two procedures:Creating from the menu which appears when running NEC Express5800 Serverwith NEC ExpressBuilderUse this procedure if you have only the NEC Express5800 Server to create theWindows 2003 OEM-DISK for NEC ExpressBuilder.■ If you have only the NEC Express5800 Server to create the Windows Server 2003OEM-DISK for NEC ExpressBuilder, use this procedure.1. Prepare a 3.5-inch floppy disks.2. Turn on your NEC Express5800 Server.3. Insert the NEC ExpressBuilder CD-ROM in the optical device drive.4. Press Ctrl + Alt + Delete to reboot the server. (You may also turn off and thenon again to reboot the server.)The system will boot from the CD-ROM and the NEC ExpressBuilder starts.5. Select [Create Support Disk] from [Tools].6. Select [Windows Server 2003 OEM-DISK for NEC ExpressBuilder] from the[Create Support Disk] menu.7. Insert a diskette in the floppy disk drive according to the on-screen instruction.Windows Server 2003 OEM-DISK for NEC ExpressBuilder will be created.8. Write-protect and label the diskette, then keep it in a safe place.
