User Guide199www.nec-computers.comThe Telnet Service is not installed.- Adjust the computer name to 14 characters or less, and then install the TelnetService as described below:1. Click [Run] on Start menu.2. Type "tlntsvr /service" in the [Open] box, and click [OK].3. Click Start menu, point to [Control Panel] and click [Computer Management]and then click the [Services] to specify whether the Telnet Service is registered.Once the installation of Telnet Service is finished, you can reset the computername to 15 characters or more.Problems with Windows Server 2003 x64 EditionsIn some cases, an event log is registered as follows when you install WindowsServer 2003 x64 Editions.Source: DCOMCategory:ErrorEvent ID: 10016Description: The application-specific permission settings do not grant Local Activationpermission for the COM server application with CLSID {555F3418-D99E-4E51-800A-6E89CFD8B1D7} to the user {NT AUTHORITY\LOCAL SERVICE} SID {S-1-5-19}.This security permission can be modified using the component Services administrativetool.- The system can be operated normally.In some cases, an event log is registered as follows when you install WindowsServer 2003 x64 Editions.Event Source:Service Control ManagerEvent Type:ErrorEvent ID:7011Description:Timeout (30000 milliseconds) waiting for a transaction response from theIMAP4Svc service.- If this event disappears when the system is rebooted, the system can be operatednormally.Problems with Windows Server 2003 R2In some case, an event log is registered as follows when you operate WindowsServer 2003 R2.Source: IPMIDRV
