User Guide300www.nec-computers.com■ When the maintenance partition does not exist, some menuitems do not appear.- Create Maintenance PartitionNEC ExpressBuilder creates a maintenance partition of about 55MB on the systemdisk (or disk array system) as work area. The various utilities are installed whenthe maintenance partition is created successfully or when the maintenance partitionis already created.- Install Maintenance Partition UtilitiesVarious utilities are installed in the maintenance partition from the CD-ROM.- Update Maintenance Partition UtilitiesVarious utilities are copied in the Maintenance Partition from the update disk. Thismenu is only used when the update disk is supplied from your servicerepresentative or attached with your system.- FDISKExecutes the FDISK command of the ROM-DOS system. You can create/deletepartitions, etc.■ System ManagementThe parameters of the Baseboard Management Card (BMC) are set for remotecontrol and alert.■ BIOS/FW/etc. UpdateThis menu allows you to update the software module such as BIOS and firmwareof the server by using the update disk (3.5-inch floppy disk) that is distributed fromNEC customer service representative.After rebooting the system, an update program starts automatically from the floppydisk, and the various BIOS and firmware programs are updated.WarningDo not turn off the server while the update program is running. Ifthis process is interrupted, the system will not start anymore.■ HelpDisplays explanations about various functions of NEC ExpressBuilder.■ Return to the Top MenuChoosing this menu returns to the Top Menu.
