User Guide243www.nec-computers.comInstalling Microsoft Windows Server 2003Express Setup proceeds the setup by specifying the necessary information on thewizard. You can also save the setup information created on the wizard in a floppy diskas a setup file.Note:■ Prepare a floppy disk to use as Configuration Disk if youwant to save the parameters or use the drivers located onthe "OEM-Disk for Mass Storage Device" that ships withoptional boards. When using the floppy disk, the Expresssetup can continue the setup without any need for you tospecify the parameters.■ The remote KVM console cannot use the mouse duringsteps 1 to 14. Use the keyboard.Right arrow key: Used to move to the next screens.Left arrow key: Used to return to the previous screen.Up/Down arrow keys: Used to select a menu.F1 key: Displays help.ENTER key: Used to select [OK] or to decide each item.ESC key: Used to select [Cancel].1. Turn the power of peripheral devices on, and then turn on the server.Note:■ If you operate installing Windows Server 2003 with a Mag-neto-Optical device connected, the installation may not becomplete successfully. In such a case, detach the MOdevice and then re-install the system from the beginning.■ Install the OS before connecting another hard disk drive.■ If you create multiple logical drives in your system, refer to“Re-installing the Operating System”.
