NEC Express5800 120Li User Manual

Also see for Express5800 120Li: Datasheet User guide

Contents

User Guide232www.nec-computers.com2. Disconnect all the LAN cables from the server.3. Plug the power cord and turn on the server.4. Use the NEC ExpressBuilder CD-ROM to reboot the server.5. Select [Tools].6. Select [System Diagnostics]. The System Diagnostics starts and completes inapproximately three minutes. When the diagnosis completes, the test windowtitle shows "Test End", as the following figure.If an error is detected during the System Diagnostics, the test result shows "AbnormalEnd" in red color. Move the cursor and press Enter on the diagnosis which erroroccurred. Take a note of the error message showed, and contact your sales agent.7. Follow the Guide line showed in the bottom of the screen and press ESC toshow the End user Menu showed below.Table 3 - 1: System Diagnosis Test Window ItemsItem DescriptionDiagnosis tool title shows a name of this diagnosis and Version information.Test windows title shows the progress of diagnosis. When it completes, it shows "TestEnd"Test Result shows the information including time of start, end and progress, andresult of the diagnosis.Guide line shows a description of keys to navigate the windowTest window Move the cursor and press Enter to view the detail of the diagnosis[Enter] Detail Information [ESC] Return to Enduser MenuTest EndTeDoLi(TEst & Diagnosis On Linux) Ver001.00(Build020901.1.1m)MEM Memory 16 count NormalEndCACHE Cache 49 count NormalEndHDD_02:000 DK32DJ-36W 89 count NormalEndStart10:06:58 End 10:09:58 Pass 000:03:00 TestTime 000:03:00Test End : NormalEnd 03 AbnormalEnd 00 ForceEnd 00Guide lineTest windowTest resultTest windows titleDiagnosis tool titlePlease choose a function by the arrow key and push Enter key.Enduser MenuTeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)