User Guide299www.nec-computers.com■ Create Support DiskThe NEC ExpressBuilder CD-ROM contains a number of device drivers andutilities that you can put on floppy disks and load onto your system.Use this menu to create a support disk by copying from the NEC ExpressBuilderCD-ROM. If your system is running a Windows operating system, you may find itmore convenient to use NEC ExpressBuilder for Windows-based to make supportdisksWrite the displayed title on the floppy disk label, which is useful for managementin the future. Customers are to provide a floppy disk to create a support disk.- Windows Server 2003 x64 Editions OEM-DISK for NEC ExpressBuilderCreates a support disk used for the installation of Windows Server 2003 x64Editions.- Windows Server 2003 OEM-DISK for NEC ExpressBuilderCreates a support disk used for the installation of Windows Server 2003 StandardEdition and Windows Server 2003 Enterprise Edition. (No need to create this diskwhen installing the operating system with the Express Setup.)- ROM-DOS Startup FDCreates a support disk used to start the ROM-DOS system.- Off-line Maintenance Utility Bootable FDCreates a support disk used to activate the Off-line Maintenance Utility.■ Setup Maintenance PartitionThe Maintenance partition is a specific partition for the server that is created onyour system disk. About 55MB of the maintenance partition includes the variousmaintenance utilities and executable commands.Warning■ Do not reset or turn off the server while running this menu. Ifthis process is interrupted, the system will not start anymore.■ The existence of the maintenance partition may be identifiedfrom the operating system. In order to retain the Configura-tion Data, do not delete the partition.Notes:■ The maintenance partition, once created, cannot be recre-ated again.
