User Guide73www.nec-computers.comMain MenuWarningCheck and adjust the system clock before the operation if anyof the following conditions is applicable.■ After carriage of device■ After storage of device■ After the device is entered into the pause state under theenvironmental condition enduring device operation (temper-ature: 10°C - 35°C, humidity: 20% - 80%)Check the system clock at the rough rate of once per month.When your system requires high time precision, we recommendusing a time server (NTP server).If the system clock is significantly delayed or advanced as thepassage of time in spite of adjustment, contact your servicerepresentative for maintenance.Primary and Secondary Master & Slave IDE & Serial ATA Channel 0 & 1 submenusCorrespondence between the menu items and devices:■ Primary IDE Master: ATA hard disk drive 1 (not supported)■ Primary IDE Slave: ATA hard disk drive 2 (not supported)■ Secondary IDE Master: Optical disc drive (standard)■ Secondary IDE Slave: NoneTable 4: Main MenuFeature Choices orDisplay OnlyDescription Your SettingSystem Time HH:MM:SS Set the System Time.System Date MM/DD/YYYY Set the System Date.Hard Disk Pre-DelayDisabled3, 6, 9, 12, 15, 21,30 SecondsAllows slower spin-up drives tocome ready.Primary IDE Master Selects sub-menuPrimary IDE Slave Selects sub-menuSecondary IDEMasterSelects sub-menuSecondary IDESlaveSelects sub-menuProcessor Settings Selects sub-menuLanguage English (US)ItalianoEspañolFrançaisDeutschSelect the display language forthe BIOS.
